Vespa S 2012 - Engine from Vehicle; Removal of the engine from the vehicle

Exhaust assy. Removal
- Remove the 2 fixing nuts from the manifold to the
head
- Remove the Lambda probe from its support and
disconnect it.
- Release the lambda probe cable from the bracket
on the fan cover.
- Loosen the 2 exhaust fixing screws to the crank-
case, then remove the whole exhaust.
- Remove the lambda probe from the manifold.
Removal of the engine from the vehicle
CAUTION
Engine from vehicle Vespa LX - S 125 3V ie 150 3V ie (2012)
ENG VE - 110