Vestax HDR-V8 - MIDI Controller Assignments; Continuous Controller Parameter Map

Vestax HDR-V8 Continuous Controller Assignments
The CC assignments needed to control the internal mixer are listed in the following table.
Please assign each parameter of the MIDI or the Mixer Map on the sequence program to
control the parameter of the internal mixer.
0-7 (0-7 hex) Pre EQ level, Tracks 1-8 full scale off, -57.5,-57.25,...+6.0dB
(2 byte controller accepted)
8-15 (08-0F) Track volumes 1-8 full scale off, -63 .5,-63.25,.. .0dB
(2 byte controller accepted)
16-23 (l0-17) Pan, Tracks 1-8 14-114 left 100%, 98%,...Right 100%
24-26 (18-19) AUX send masters 1,2,3 full scale off,-63.0,-62.5,...0dB
30 (1C) Left Master volume full scale off,-63.0,-62.5,...0dB
31 (1D) Right Master volume full scale off,-63.0,-62.5,...0dB
32-39 (20-27) Optional LSB for pre eq level,tracks 1-8
40-47 (28-2F) Optional LSB for track volumes 1-8
48-55 (30-37) EQ 1 gain, tracks 1-8 4-124 -12.0,-11.8,...+12.0dB
0dB=64
56-63 (38-3F) EQ 3 gain, tracks 1-8 4-124 -12.0,-11.8,...,12.0dB
0dB = 64
56-63 (38-3F) EQ 1 freq, tracks 1-8 12-120 50Hz,53Hz,...11.986KHz
64-71 (40-47) AUX send 3,tracks 1-8 full scale off`-63.00,-62.50,….0.00dB
72-79 (48-4F) EQ 2 gain, tracks 1-8 4-124 same as eq1 gain
80-87 (SO-57) EQ 2 freq, tracks 1-8 12-120 same as eq1 freq
88-95 (58-5F) EQ 2 type, tracks 1-8 0-65 same as eq1 type
96-103 (60-67) AUX send 1, tracks 1-8 full scale off,-63.0,62.5,...0dB
104-111 (68-6F) AUX send 2, tracks 1-8 full scale off,-63.0,62.5,... 0dB
112-119 (70-77) mute, tracks 1-8 switch 0-63 unmuted, 64-127muted