8
DIGITAL MIXER SECTION
LEVEL
VOLUME
1. Press the LEVEL button and select VOL (volume).
The VOL LED lights up and the bargraph shows the level of each track.
2. Press the track button to select that track. Selected track LED lights up. Adjust the volume using
the Jog Dial. The counter displays the level attenuation relative to 0 to -63.5 and OFF. The counter shows
the level value of the selected track with dB.
3. Adjust the level using the Jog Dial.
PAN
1. Press the LEVEL button and select PAN. The PAN LED lights up. The Bargraph shows the pan
position of each track. Down is left, Center is center, and Up is right.
2. Select the track to adjust the pan. The selected track LED lights up. The counter shows the pan
position of the selected track. The pan is adjustable from Left100% to center to Right100%.
3. Adjust the pan position by using the Jog Dial.
MASTER LEVEL
1. Press the LEVEL button and select MASTER (Master Output Level). The MASTER LED lights up .
The bargraph shows the levels of AUX 1 to 4 on tracks 1 to 4, and Master L and R is shown on tracks 7
and 8. Select the track to adjust the appropriate levels.
2. The selected track LED lights up. The counter shows the level value of the selected parameter
with dB. The maximum level is shown as 0dB and goes down to -63.5 dB to off.
3. Adjust the level by using the Jog Dial.
JOG DIAL
To Next Page
Loading...