· Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
· Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands of untrained users.
· Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
· Keep cutting parts sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
· Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
CORDLESS HEDGE TRIMMER SAFETY WARNINGS
1. Keep all parts of the body away from the cutter blade. Do not remove cut
material or hold material to be cut when blades are moving. Make sure the
product is switched off when clearing jammed material. A moment of
inattention while operating the product may result in serious personal injury.
2. Carry the product by the handle with the cutter blade stopped. When
transporting or storing the product, always fit the cutting device cover.
To Next Page
Loading...
