Trimming tips:
-Keep the trimmer tilted toward the area being cut. This is the most efficient cutting
area.
-The string trimmer cuts when moving the unit from left to right. This will avoid
throwing debris at the operator.
-Use the tip of the string to do the cutting, do not force the string head into uncut
grass.
-Wire and picket fences cause extra string wear, and breakage. Stone and brick
walls, curbs, and wood may wear string rapidly.
-Avoid trees and shrubs. Tree bark, wood moldings, siding, and fence posts can
easily be damaged by the strings.
2. Converting to edging mode (Fig. 8 & 9)
-Hold the Main Handle, pull the button on the tube end backward, and rotate the
tube by 90°.
-Release the button to fix the edging mode and position the trimmer with flower
Guard to operate as a maintenance edger
-Restart the machine after a complete stop. It will feed the spool line automatically.
-Return to the trimming position by reverse rotation after pulling the button
backward.
To Next Page
Loading...
