if the infuser malfunctions.
24. Do not use the infuser for anything other than its intended purpose.
Always inspect all parts of the infuser and power cord for damages before use.
Please do not use it if damages are present.
25. Warning: This appliance generates heat and escaping steam during use.
Proper precautions must be taken to prevent the risk of burns, fires, or other
injuries to persons or damage to property.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
BASIC OPERATION
Connect the power cord below the handle on the base and plug it into the
outlet.
Load the main chamber with ingredients and press the top control unit on
firmly.
Press the “Choose” button to cycle through the available options
Once your desired option is flashing, hit the start button to use the preset time
and temperature settings.
You can also use your own custom settings for time and temperature. While
the desired option is flashing, set your desired time using the “Time” button.
Time increases in 5-minute increments with each button press. The time
range is 30 mins to 12 hours.
Set the desired temperature with the “Temp” button. Temperature increase in
one-degree increments. The temperature range is from 30 ℉ to 250℉.
Once your custom settings are ready, press “Start”.
Machine mixing blades will automatically start when 80% of the set
temperature is reached (Except for the decarb setting). Blades will turn on in
regular, even intervals.
Display will count down the remaining time and will automatically shut off and
display “END”.
To stop the unit at any time, press and hold the start button for 3 seconds.
To Next Page
Loading...
