VEVOR DZ-260A-V1 - User Manual

Questions and Answers

J
Jennifer ColemanAug 7, 2025
Why VEVOR DZ-260A-V1 Kitchen Appliances vacuum sealing failure or poor?
- S
  Sara HansenAug 7, 2025
  Sealing issues with your VEVOR Kitchen Appliances can occur for several reasons: * The bags may not be correctly placed on the heating plates. * The sealing time might be too long or too short. * The heating temperature could be inappropriate. * The silicon strip may be damaged or have impurities. * The electric heating wire might be damaged. To resolve this, ensure the bags are correctly placed, adjust the sealing time, select the proper temperature, clean or replace the silicon rubber, or change the electric heating wire.
D
Dave WilliamsAug 18, 2025
Why VEVOR Kitchen Appliances not achieving best vacuum state and vacuumizing slow?
- T
  Tyler RomanAug 18, 2025
  If your VEVOR Kitchen Appliances isn't reaching the best vacuum state or the vacuumizing speed is slow, it could be due to: * Short vacuumizing time: Extend the vacuum time. * Insufficient or unclean oil in the vacuum pump: Check the oil level and refuel or change the oil, using vacuum oil 46# or 68# and the correct quantity. * Air leakage or wear of the sealing ring: Replace the sealing ring.
B
Brian Smith PhDAug 27, 2025
How to fix VEVOR Kitchen Appliances when the machine doesn't work and the control panel shows nothing?
- P
  Preston ParrishAug 27, 2025
  If your VEVOR Kitchen Appliances isn't working and the control panel displays nothing, it could be due to: * No power supply connection: Check if the plug and socket are effectively connected. * Loose contact of the power switch: Check whether the wiring of the power input part inside the machine is loose or detached.