VEVOR DZ-260C-V2 - User Manual

16 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Technical Support and E-Warranty Certificate

www.vevor.com/support

VACUUM PACKING MACHINE

USER MANUAL

Model:DZ-260C-V1,DZ-260C-V2,DZ-260C-V3

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represents an

estimate of savings you might benefit from buying certain tools with us compared to the major

top brands and does not necessarily mean to cover all categories of tools offered by us. You

are kindly reminded to verify carefully when you are placing an order with us if you are

actually saving half in comparison with the top major brands.

Table of Contents

Questions and Answers

E
Emily ReedAug 10, 2025
Why is the VEVOR Kitchen Appliances sealing poorly?
- D
  Donna AyersAug 10, 2025
  If you're experiencing sealing failures or poor sealing with your VEVOR Kitchen Appliances, here's what you can check: * Make sure the bags are placed correctly on the heating plates. * Adjust the sealing time, either shortening or prolonging it. * Ensure you're using the appropriate heating temperature. * Inspect the silicon strip for damage or impurities; clean or replace it if necessary. * If the electric heating wire is damaged, replace it.
M
mcintoshnicholasAug 19, 2025
Why is vacuum pumping speed slow on my VEVOR Kitchen Appliances?
- S
  Sara BishopAug 19, 2025
  If your VEVOR Kitchen Appliances aren't achieving the best vacuum state or the vacuum pumping speed is slow, consider the following: 1. Extend the vacuum time. 2. Check the oil level in the vacuum pump. Refuel or change the oil, making sure to use the correct type (vacuum oil 46#, 68#) and quantity. 3. Inspect the sealing ring for air leaks or wear and replace if needed.
S
smithjasonAug 29, 2025
Why doesn't my VEVOR DZ-260C-V2 work after the control panel starts?
- D
  Dorothy NelsonAug 30, 2025
  If the control panel of your VEVOR Kitchen Appliances starts up but the machine itself doesn't work, it might be because the parameter is being set. Complete the parameter setting.

Summary

General Safety Rules

Model and Parameters

Structure Diagram

Parts List

Operating Instructions

Panel Usage Instructions

Guide to setting vacuum, sealing, and cooling times on the control panel.

Circuit Diagram

Maintenance

Replace High Temperature Cloth (Teflon Cloth)

Procedure for replacing the Teflon cloth on the sealing bar.

Troubleshooting and Solutions

Correct Disposal

Summary

General Safety Rules

Model and Parameters

Structure Diagram

Parts List

Operating Instructions

Panel Usage Instructions

Guide to setting vacuum, sealing, and cooling times on the control panel.

Circuit Diagram

Maintenance

Replace High Temperature Cloth (Teflon Cloth)

Procedure for replacing the Teflon cloth on the sealing bar.

Troubleshooting and Solutions

Correct Disposal

VEVOR DZ-260C-V2 Specifications

General

Model	DZ-260C-V2
Category	Kitchen Appliances
Power	370W
Voltage	110V/60Hz
Material	Stainless Steel
Sealing Length	260mm
Sealing Width	10mm

Related product manuals

Preview: VEVOR DZ-260C-V1

VEVOR DZ-260C-V1

Preview: VEVOR DZ-260A-V1

VEVOR DZ-260A-V1

Preview: VEVOR DZ600-2S-V1

VEVOR DZ600-2S-V1

Preview: VEVOR DT-318

Preview: VEVOR VS5164

Preview: VEVOR JK-195

Preview: VEVOR SC-5XD

Preview: VEVOR MHTJJPZY01

VEVOR MHTJJPZY01

Preview: VEVOR EZL-EH-30S-E

VEVOR EZL-EH-30S-E