It is prohibited to use power sources other than the rated voltage
(120V~, 60Hz). Otherwise, it may damage this product and
cause a fire.
To avoid danger caused by incorrect reset of the thermal circuit
breaker, the product cannot be powered through external
switching devices. For example, a timer or a circuit connected to
a universal component for timing on and off. Otherwise, it may
cause a fire.
Prohibit installation near curtains and other combustible
materials. Otherwise, it may ignite combustible materials.
It is prohibited to use this product under a power outlet.
Otherwise, it may cause electric shock or fire.
Do not remove the circuit board cover during installation and
use. Otherwise, it may cause electric shock or fire.
Please have two people carry out the installation of the product.
The installation of components and the machine body must be
firm. Otherwise, the product may fall and cause injury.
When special components such as hardware are installed,
special components should be used. Otherwise, the product
may fall and cause injury.
The building structure and suspension rods for installing
products must have sufficient installation strength to ensure that
they can bear a strength greater than 5 times the weight of the
product. If the installation strength cannot be guaranteed,
please take reinforcement measures. Otherwise, the product
may fall and cause injury.
It is prohibited to modify this product. Otherwise, the product
may fall and cause injury.
To Next Page
Loading...
