installed.
Installation of the water ionizer machine
Fix the water ionizer machine on the wall with hanging kit.
The first step is to directly place the machine in a convenient and suitable
position on the counter;
The second step is to measure the appropriate height above the sink
(30-50cm above the sink is appropriate), take out the accessories in the
accessory bag, take out the hanging plate to determine the machine
hanging holes position.
If the installation environment is not convenient to drill holes, please use
nail-free glue to fix the wall hanging plate. After determining the position of
the wall hanging plate, evenly apply the nail-free glue to the fixing surface
of the wall hanging plate, and then stick to the fixed position of the wall
surface (complete the operation within 5 minutes to prevent glue from
solidification). After fixing with nail-free glue, it is necessary to wait 24
hours after the glue is completely solidified before hanging the machine on
the wall.
To Next Page
Loading...