• Do not put heavy weight on it
• To avoid electric shock or catching fire, stop using the machine once
damage is found on the power cable or plug. Please contact professionals
to repair the damaged power cable and plug.
• Always insert the plug to the end. Stop using a damaged or loosened
power plug. If not, it may cause the electric shock or catch fire.
• Clean the dusts on the power plug pins regularly. Because if the dust
contacts the water mist, there is a risk of electric shock or catching fire. Do
not use volatile solvents to clean the machine. Clean it with soft cloth and
detergent.
DO NOT INSTALL THE WATER IONIZER IN THE PLACES BELOW
• Near the Fire or high temperature(Over 60℃) place
• Outdoors or exposing to the sun or rain
• In steam or moisture place
• Do Not disassemble, repair or modify the machine on your own. Please
contact the distributor/seller or professionals for any question.
TECHNICAL PARAMETERS AND SPECIFICATIONS
To Next Page
Loading...