Turn on the power button. Turn up the water flow regulator, then water
enters the water ionizer. The screen will be light up as soon as the water
flow rate is over 0.8L/min, then the unit will start electrolyzing.
The screen will be light up, and the default pH level is on Coffee / Tea water
level, and at the same time, a fast triple beep sound will be heard.
Press the 3 alkaline water level buttons (Drinking, Coffee / Tea, Cooking) to
select different alkaline pH water levels for different usages. The screen
light turns to different colors to indicate different alkaline water levels. The
alkaline water will come out from the top stainless-steel spout, and the
acidic water will come out from the bottom drain hose.
Press the Purified Water Button, the ionizer will produce purified water
which is not electrolyzed (screen light turns green). The light turns off 1
minute after water supply is turned off. The ionizer automatically switches
to Coffee / Tea water level.
When the Sanitizing Button is pressed, a continuously beep will be heard
(screen light turns red). The acidic water will come out from the top
stainless-steel spout, and the alkaline water will come out from the bottom
drain hose. Light turns off 1 minute later after water supply is turned off.
The ionizer automatically switches to Coffee / Tea water level.
When the Skin Washing Button is pressed, a continuously beep will be
heard (screen light turns red). The acidic water will come out from the top
stainless-steel spout, and the alkaline water will come out from the bottom
drain hose. Light turns off 1 minute later after water supply is turned off.
The ionizer automatically switches to Coffee / Tea water level.
When the Cleaning Button is pressed, the music will be heard. The screen
light turns red. After the cleaning (about 1 minute), the ionizer will
automatically switch to Coffee / Tea water level.
To Next Page
Loading...