button to decrease. Then press the Skin Washing water button to save the
setting and exit to standby state.
Note: When the filter lifespan is less than 100Liters, the filter lifespan
indicator will flash to remind replacing the filter.
5.Cleaning Setting:
Press and hold the Skin Washing water button for 5 seconds to enter the
filter lifespan setting, then continue to press Skin Washing water button for
3 times to enter the cleaning setting. Press Cleaning button to increase and
Heating Button to decrease. You can choose from "30, 40, 50, 60, 70, 80,
90, EL" according to the input water quality. The numbers mean every time
the water discharge capacity reaches the corresponding amount, the red
cleaning light is on. You will need to press the cleaning button manually to
start the cleaning program. If set to "EL", every time the water discharge
capacity reaches 90L, the red cleaning light is on, and automatic cleaning
process will start next time as the water running though.
After setting, press Skin Washing water button to save the setting and exit
to standby state on the Coffee / Tea water level.
When cleaning program is running, the music plays, red cleaning light
flashes, and the LCD turns red. After 1 minute, the cleaning process will
stop automatically and return to standby state in the default Coffee / Tea
water level.
General Use & Instruction For Different pH Water
Uses Of Different pH Water
To Next Page
Loading...