CLEANING DISINFECTION AND STORAGE
WARNING!
Unplug the pump before starting the cleaning procedure.
1.Clean the mattress with mild soap.
2. Do not immerse or soak pump unit.
3. After cleaning, dry the mattress without direct sunlight exposure.
4. Check that the connection tubes are not obstructed by dust or
other object. Use a soft swab to clean the tubes if necessary.
( NOTE: Never use acids, alkalis or solvents such as acetone to
clean the mattress.)
STORAGE
1. Switch off power from main and unplug separate the pump from
the mattress and place the mattress flat.
2. Fold the mattress in two from mattress foot to head.
3. Allow time for air to escape from mattress to reduce storage
space.
4. Close the protective cap cover on the quick connector.
Sanven Technology Ltd.,
Made In China
To Next Page
Loading...
