- The manufacturer reserves the right to change the information contained in this
document without prior notice.
INTENDED USE
Auto-pressure control Medical Air Mattress is designed for bed sore and wound
care therapy treatment and prevention, which may occur during an extended
hospital stay and nursing home/long term care environment.
TECHNICAL FEATURES
MATTRESS COVER
Please note this is only temporary. The cover sheet protects the cells against
unexpected contamination, and makes cleaning of the mattress easier.
INSTALLATION
1.This is a replacement mattress.Place the mattress directly on the bed frame,
with the air hose connectors positioned at the foot board.
2.Hang the pump onto the bed board(foot board side) using the hooks on back of
the pump, or place it on a flat surface.
3.Connect air hose connectors from air mattress to the pump unit.Ensure the air
hoses are not kinked or tucked under the mattress.
4.Plug the power cord in to the electrical outlet.
5. Turn the power ON.
To Next Page
Loading...
