sure that it has completely thawed out before you switch it on.
8. To avoid scalding, please feel the outlet hot water temperature with your
hand to ensure it is suitable for showering before showering.
9. Before connecting pipes to the water heater hoses, it is extremely
important to FLUSH the pipes to wash away all plumbing paste or residue
in the pipes.
10. The heating chamber is treated with composite nano insulation material;
it is natural if there might be a bit of smell or green blue smoke when the
unit is used for the first time.
11. If there is damage to the wire, you must contact qualified electrician to
replace it with dedicated wire from our authorized dealers.
12. CAUTION: FOR HOUSEHOLD AND INDOOR USE ONLY
13. Risk of electric shock, CONNECT ONLY TO A CIRCUIT THAT IS
PROTECTED BY A GROUND-FAULT CIRCUITINTERRUPTER(GFCI).
14. Save this instruction.
The tankless electric water heaters are incorporated with China's national
patent technology with multi-safety devices. Besides, the unit has the
following features.
1. Tankless, instantaneous heating for on-demand hot water. No
pre-heating. No stand-by heating loss. Energy-saving.
2. Micro-computer control, Adopting patent heating technology. Water is
completely separated from electricity by multi-layers of composite nano
insulation material.
3. Over temperature protection: when the outlet water temp. reaches over
167℉/75℃, the electricity will be cut off to avoid getting scalded and the
screen displays E1. the appliance will start to work automatically while
temp. drop to the set temperature.
4. Malfunction of sensor- when there is malfunction with the inlet
temperature sensor, the heater stops working and displays E3.
5. Malfunction of sensor- when there is malfunction with the outlet
temperature sensor, the heater stops working and displays E3
6. Conversion between degree Fahrenheit and degree Celsius.
To Next Page
Loading...