SERVICING OF A DOUBLE-INSULATED PRODUCT
In a double-insulated product, two systems of insulation are provided
instead of grounding. No grounding means is provided on a
double-insulated product, nor should a means for grounding be added to
the product. Servicing of a double-insulated product requires extreme care
and knowledge of the system, and should be done only by qualified service
personnel. Replacement parts for a double-insulated product must be
identical to those parts in the product.
Intend use
Coating Materials Suitable for Use
Water- and solvent-based paints, finishes, primers, 2-component paints,
clear finishes, automotive finishes, staining sealers and wood
sealer-preservatives. (non-flammable materials having a flash-point above
55C).
Coating Materials Not Suitable for Use
Wall paints (emulsion paints) etc., alkali and acidic paints.
The tool is to be used only for its prescribed purpose. Any other use
is deemed to be a case of misuse.
TECHNICAL SPECIFICATIONS
To Next Page
Loading...
