2. Start-up
Before connecting to the mains supply, be sure that the supply
voltage is identical with the value given on the rating plate.
1) Mounting air hose. Insert the air hose coupler tightly in the
connections on the machine and the spray gun.
2) Unscrew the container from the spray gun. Aligning suction tube.
The container contents are to be sprayed out almost completely.
When spraying horizontal surfaces, turn suction tube forward (A).
When spraying objects overhead, turn suction tube back (B).
3) Pour in the prepared coating material and screw the container
tightly onto the spray gun.
4) Carry the gun with base handle or belt, during normal use.
5) Adjust the spray setting on the spray gun.
To Next Page
Loading...
