INSTALLATION STEPS FOR TYPE D(SKU16~SKU17)
STEP 01 Dimension select
The sizes of the type D curb ramps are listed in parameter table. The load
limit is 15 tons. Please choose the size that matches the ramp.
STEP 02 Use the adhesive tape
Use double-sided tape to secure to the ground.
How to Keep Ramp From Moving Out of Place
Don't enter the driveway at an angle. If you can drive out to the street
with both tires impacting the ramps at the same time, the ramps will stay
put.
How to Adjust Position of A Curb Ramp Set
Straddle the ramp at the center.Pick up the ramp and lean back in the
direction you want it to go.
To Next Page
Loading...
