EasyManua.ls Logo

VEVOR LT2V-39 - Heating Element Care; Broken Cooktop Warning; Cleaning Caution; Installation

VEVOR LT2V-39
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
range-top service due to the sudden change in temperature, which may
result in breakage.
•Do not soak removable heating elements. Heating elements should never
be immersed in water.
•Do not cook on a broken cooktop. Contact a qualified technician
immediately.
•Clean cooktop with caution. Be careful to avoid steam burns if a wet
sponge or cloth is used to wipe spills on a hot cooking area. Some cleaners
can produce noxious fumes if applied to a hot surface.
SAVE THESE INSTRUCTIONS
INSTALLATION
1. Cut a hole in the worktop of the dimension shown in the diagram below A
minimum of 50mm space should be left around the hole The worktop
should be at least 30mm thick and made of heat resistant material.
2. It is essential that the Radiant Cooktop is well ventilated and that the air
intake and exit are not blocked.
Make sure the cooktop is correctly installed as shown in Figure 2.

Related product manuals