Power
Press the button for the required cooking zone.
You can slide the to change the power levels of
the relevant cooking zone.The operation of zones is the same.
up to max. 1000 W
up to max. 800 W
Residual heat indicator
When the hob has been operating for some time, there will be some
residual heat.
The residual heat indicator warns for each cooking zone separately with
"H" symbol.
Timer
After you have selected the cooking zone, please press .
Timer confirmation:
The default ones place time LED is flashing. With sliding the
to set time of the ones place. Press the
again, the tens place time LED is flashing. With sliding the
to set time of the tens place. ( Timer max. 99 min.)
After 5 seconds no number level key be pressed, the time will start timing
and the display will indicate the countdown time until to “00”. If the two
zones have been set different time, the display will indicate the two setting
times one by one.
Timer cancellation：
By pressing onto timer key choose the zone you want to cancel the timer.
Then slide the setting time to be “00”, and the timer function will be
To Next Page
Loading...
