5. When operating pumps or devices, please wear safety glasses and use
hearing protection.
6. Do not stand or use the pump or device as a handle.
7. Before each use, check the compressed air system and electrical components
for signs of damage, deterioration, weakness, or leakage. Repair or replace
defective items before use.
8. Check all fasteners for tightness at regular intervals.
▲WARNING!
Equipment and control devices can generate arcs, igniting flammable gases or
vapors. Do not operate or repair in or near flammable gases or vapors. It is
prohibited to store flammable liquids or gases near the compressor.
▲CAUTION!
Even if the unit stops, the compressor components may still be hot.
9. Keep your fingers away from the running compressor, as moving quickly and
overheating components can cause injury and/or burns.
10. If the equipment begins to vibrate abnormally, please stop the engine/motor
and immediately check the cause. Vibration is usually a warning of a malfunction.
11. To reduce the risk of fire, the exterior of the engine/motor should be kept free
of oil, solvents, or excessive lubricating grease.
SPRAYING PRECAUTIONS
• WARNING!
Do not spray flammable materials in vicinity of open flame or near ignition
sources including the compressor unit.
12. Do not smoke when spraying paint,insecticides, or other flammable
substances.
13. Use a face mask/respirator when spraying and spray in a well ventilated area
to prevent health and fire hazards.
14. Do not spray paint or other spraying materials directly onto the compressor.
Place the compressor as far away from the spraying area as possible to minimize
the accumulation of excessive spray on the compressor.
15. When spraying or cleaning with solvents or toxic chemicals, follow the
instructions provided by the chemical manufacturer.
To Next Page
Loading...
