ASSEMBLY
1.
As this product is an independent air compressor pump, please make sure to
check the product's specifications before installation and use to avoid incorrect
matching and problem points.
2.
Before installation, please pay attention to checking whether the performance
parameters of the motor matched with the installation of the air compressor pump
meet the requirements, and confirm whether the rated working pressure of the air
storage tank matches the rated working pressure of the air compressor pump.
3.
During installation, please ensure that the air compressor pump is securely
fixed to the rack board with bolts. If it is not securely fixed, there is a risk of the air
compressor pump flying out and injuring people.
4.
After installation, please pay attention to checking whether the inlet and outlet
direction connections of the air compressor pump are correct, and install the
corresponding matching air to avoid inhaling foreign objects and causing damage
to the air compressor pump.
5.
Please use the capacitor specifications that come with the air compressor
pump. Capacitors that do not meet the requirements are at risk of damaging the
air compressor pump.
6.
After powering on and starting to use, please pay attention to checking for any
abnormal vibrations in the air compressor pump. If there are any abnormal
vibrations, the installation and accessories need to be rechecked until they are
repaired.
Wiring diagram of air compressor pump:
To Next Page
Loading...
