MAIN TECHNICAL DATA
315x154x296mm / 12.4x6.06x11.65inch
Install
Position
It is very important to install the compressor in a clean and well ventilated place.
The minimum gap between the compressor and the wall is 18 inches, as objects
can obstruct airflow, the composite air temperature should not exceed 100
degrees Fahrenheit.
Correct Disposal
This product is subject to the provision of european Directive
2012/19/EU. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be discarded with
normal domestic waste, but must be taken to acollection point for recycling
electrical and electronic devices.
To Next Page
Loading...
