Vex Robotics Clawbot Build Instructions

Parts List
3x 228-2500-120
1x 228-2500-123
30x 8-32 Nut
276-1028-001
23x 228-2500-143
1x 12T
276-6010-011
5x 276-6009-004
7x 276-6009-005
15x 276-6009-003
10x 276-2250-005
1x 276-2250-007
30x 8-32 x 0.375 in
276-4991-001
4x 8-32 x 0.5 in
Locking
276-5007-001
2x 8-32 x 1 in
276-4996-001
6x 8-32 x 1.5 in Locking
276-6009-007
6x 228-3943-086
1x 84T 276-3438-331
1x 276-4810
4x 276-4840
2x 228-4133-474
1x 276-4811
1x 276-4831
5x 276-1209-001
2x 276-6020-001
3x 228-2500-124
2x 228-2500-122
1:1
8x 0.125 in
276-5912-001
4x 0.375 in
276-5914-001
3x 0.5 in
276-5915-001
2x 0.875 in
276-5918-001
1x 12T Pinion
276-2250-008
All V5 Control System, gears, wheels,
wires, and structure are not to scale
All other parts listed are 1:1 scale.
Hacksaw is required, ask a parent/
mentor for help.
For build instructions using the Cortex System Bundle
Please visit:
www.vexrobotics.com/v5/downloads/build-instructions

Vex Robotics Clawbot Specifications

General

Category	Robotics
Motor Count	4
Claw	Yes
Controller	VEXnet Joystick
Programmable	Yes
Name	Clawbot
Motor Type	VEX 393 Motor
Power Source	7.2V NiMH Battery
Programming Language	VEXcode
Material	Metal and Plastic
Compatibility	VEX Robotics Design System