VIAIR 325C - Important Safety Instructions; Electrical Shock Precautions; Injury Prevention Warnings; Installation

IMPORTANT SAFETY INSTRUCTIONS
CAUTION - To reduce risk electrical shock:
- Donotdisassemble.Donotattemptrepairsormodications.Refertoqualiedserviceagencies
 forallserviceandrepairs.
- Donotusethisproductinorareawhereitcanfallorbepulledintowaterorotherliquids.
- Donotreachforthisproductifithasfallenintoliquid.
- Usethiscompressorwith12-voltDCsystemsonly.
- Thisproductshouldneverbeleftunattendedduringuse.
WARNING - To prevent injury:
- Neverallowchildrentooperatethiscompressor.Closesupervisionisnecessarywhenthiscompressor
is being used near children.
- ThiscompressorwillbecomeveryHOTduringandimmediatelyafteruse.Donottouchanypartofthis
 compressorwithbarehandsotherthantheON/OFFswitch,duringandimmediatelyafteruse.
- Donotusethisproductnearamesorexplosivematerialsorwhereaerosolproductsarebeingused.
- Donotoperatethisproductwhereoxygenisbeingadministered.
- Do not pump anything other than atmospheric air.
- Neverusethisproductwhilesleepyordrowsy.
- Donotuseanytoolsorattachmentswithoutrstdeterminingmaximumairpressureforthattool
or attachment.
- Neverpointanyairnozzleorairsprayertowardanotherpersonoranypartofthebody.
- ThisaircompressorisequippedwithanAutomaticResetThermalProtector,andcanautomatically
 restartafterthethermalprotectorresets.Alwayscutoffpowersourcewhenthermalprotector
 becomesactivated.
- Wear safety glasses or goggles when operating this product.
- Useonlyinwellventilatedareas.
INSTALLATION
Pleasereadandfollowtheinstallationinstructionscarefullytoavoidinjuryordamagetothe
compressororyourvehicle.
Eachofouraircompressorsandpartshavebeencarefullyproducedandpackaged.Beforeyou
begininstallation,pleasefamiliarizeyourselfwithInstallationPartsList(Fig.1)ofthismanual.
Guidelines for Selecting Mounting Location:
The selection of proper mounting location for your air compressor will help ensure a long and trouble
freecompressorservicelife.Pleasepay close attention to the following guidelines:
1. Select a FLAT,UPRIGHTANDSECURE location where the compressor can be mounted.
2.Tomaximizeaircompressorperformance,locatecompressorasCLOSETOTHEBATTERY as
 possiblesothatlengthofpositiveleadwirerequiredisataminimum.
3. Choose mounting location that is as cool as possible and AWAYFROMHEATSOURCES.
 Thecoolertheambienttemperature,thelesschancethecompressorwilloverheat.
4.Thiscompressorismoisture&dustresistant,butNOTDIRTORWATERPROOF. Do not mount
compressor in locations where the unit is likely to come in contact with the elements.
5.Forcompressorwithremoteltermounting,selectcompressor’smountinglocationwhereairline
 canberoutedfromcompressorairinlettoremoteinletairlter.Makesurethattheremoteinletair
 lterislocatedinadrylocation,awayfromtheelements.
6.Youwillalsowanttoselectacompressormountinglocationwheretheleaderhosebracketcanbe
mounted to leader hose. (Not applicable to P/N 32534)
7.Ifitisnecessarytomounttheaircompressorfurtherawayfromthebattery,suchasinside
 yourvehicleorinthebedofyourpickup,useaminimum10AWGpositiveleadwirefor
remote installation.
8.Donotmountcompressornearareaswhereammableliquidsarestored.
9.Usethreadsealantforproperttinginstallation.Teontapeisnotrecommended.
 Properlysealed,recommendedtorqueis12to15ft.lbs
USER MANUAL
325C - 350C - 400C - 450C COMPRESSOR KIT