Need help?Do you have a question about the VIAIR 10002 and is the answer not in the manual?
General| Maximum Pressure | 150 PSI |
|---|---|
| Duty Cycle | 100% |
| Power Source | 12V DC |
| Voltage | 12V |
| Air Flow Rate | 2.54 CFM |
| Flow Rate @ 0 PSI | 2.54 CFM |
| Inlet Port Size | 1/4" NPT |
| Air Flow | 2.54 CFM |
| Max. Amp Draw | 30 Amps |
| Current Draw | 30A |
Lists the main components included in the onboard air system.
Details the specific parts included in each of the six labeled packages.
Guides on installing fittings like drain cock and safety valve.
Critical safety and usage notes for the air tank.
Advice on selecting a suitable mounting spot for the compressor.
Detailed steps for electrical connections and physical mounting.
How to safely operate the compressor and its features.
Recommended maintenance tasks and repair procedures.
Additional advice for optimal compressor installation.
Guidance on correctly positioning the pressure switch.
Best practices for cutting and routing air lines.
Steps to test the installed air system for leaks and function.
Addresses issues like pressure drops, continuous operation, and no power.
Chart to select appropriate wire gauge based on amp draw and distance.
Visual representation of the system's electrical connections.
Information on product warranty coverage and claims.
To Next Page
