VIAIR 10000 User Manual

Details on the pressure switch (85 PSI on, 105 PSI off) and 40-amp relay.

Includes various NPT fittings: drain cock, safety valve, compression fitting, male plug, and T-fitting.

Contains the 1/4" air line for remote mounting the air filter.

Includes fuse holder, 20-amp fuse, terminals, connectors, and ring terminal.

Provides a T-fitting for use with air lockers.

Contains BSP adapters for air lockers.

Components required for mounting the air compressor.

Components for securing the air tank during installation.

Instructions for installing fittings like the drain cock and safety valve on the air tank.

Critical safety notes, warnings on pressure, usage, maintenance, and potential hazards.

Advice on selecting an optimal and secure mounting location for the compressor.

Step-by-step guide for correctly wiring the 98C compressor to the vehicle's electrical system.

Guidance on installing and connecting the pressure switch and relay for system control.

Steps to test the onboard air system for proper function and leaks.

Explanation of compressor duty cycle, its calculation, and implications for usage.

Information on compressor maximum working pressure and safety considerations.