VibroSlim Radial 3D - Configuration of Pre-Set Programs

Configuration of Pre-Set Programs
With the pre-set programs, the speed setting will change at 30 seconds
intervals.
Program 1
Speed level
10 | 20 | 40 | 60 | 80 | 100 | 80 | 60 | 40 | 20 | 10 | 20 | 40 | 60 | 80 | 100 | 80 |
60 | 40 | 20
Program 2
Speed level
20 | 120 | 20 | 120 | 20 | 120 | 40 | 120 | 40 | 120 | 40 | 120 | 60 | 120 | 60 | 120 |
60 | 120 | 60 | 20
Program 3
Speed level
40 | 80 | 120 | 160 | 120 | 80 | 40 | 80 | 120 | 160 | 120 | 80 | 40 | 80 | 120 | 160 |
120 | 80 | 40 | 120
Program 4
(Press "P2" twice until P4 is activated)
Speed level
10 | 30 | 50 | 70 | 90 | 110 | 130 | 150 | 170 | 180 | 180 | 160 | 140 | 120 | 100 | 80 |
60 | 40 | 20 | 10
Precaution
Due to the necessity of using a soft rubber material on the platform feet,
always place a mat or towel under the platform to prevent any staining or
marks appearing on carpet or flooring.
21