viceroy 90RF - User Manual

Questions and Answers

K
Kelly BrockAug 10, 2025
Why is the suction performance reduced on my viceroy 90RF Ventilation Hood?
- J
  Jessica RiddleAug 10, 2025
  Reduced suction performance in your Viceroy Ventilation Hood can stem from several causes. It could be that the speed setting is too low, so try selecting a higher speed. Dirty aluminum filters can also restrict airflow, so clean them. Additionally, check for any obstructions in the top vent or ensure the optional vent kit is correctly fitted per the manufacturer's instructions. Finally, the vent hose should maintain the correct diameter throughout without reductions or restrictions.
A
Alexandria JohnsonAug 18, 2025
How to stop excessive vibration in my viceroy 90RF Ventilation Hood?
- D
  Dr. Lori GomezAug 18, 2025
  Excessive vibration in your Viceroy Ventilation Hood may be due to improper installation on the brackets. Take down the appliance and check it is properly fixed. It could also be caused by a damaged fan blade, in which case you should switch off the appliance and arrange for repair by qualified service personnel. Another possible cause is that the fan motor is not fixed tightly.
M
markvelasquezAug 25, 2025
Why do cooking smells linger even when my Viceroy Ventilation Hood works normally?
- M
  Michael FinleyAug 26, 2025
  If cooking smells linger even when your Viceroy Ventilation Hood is working, it may be because a carbon filter is not fitted in recirculation mode, or the existing carbon filter is full of grease. Fit a carbon filter or replace the carbon filter.
C
Christopher BrownSep 1, 2025
What to do if the light is on, but the fan does not work on my Viceroy Ventilation Hood?
- K
  Kevin CameronSep 1, 2025
  If the light is on but the fan isn't working on your Viceroy Ventilation Hood, the fan blade might be jammed, or the motor could be damaged.