EasyManuals Logo

Vicks V977C-AUS User Manual

Vicks V977C-AUS
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
10 11
9. Cleaningandstorage
Useanalcoholswaborcottonswabmoistenedwithalcohol(70%Isopropyl)tocleanthethermometer
casing and the measuring probe. Ensure that no liquid enters the interior of the thermometer. Never use
abrasivecleaningagents,thinnersorbenzeneforcleaningandneverimmersetheinstrumentin
waterorothercleaningliquids. After cleaning the unit should not be used until the cleaning agent
iscompletelyvaporizedasthecleaningagentmayaecttheaccuracyofmeasurements.Takecarenot
to scratch the surface of the LCD display by replacing the protective cap after each use.
10.Replacingthebattery
The Forehead Thermometer is supplied with 2 AAA batteries. Replace
with 2 new AAA batteries when the ashing battery symbol appears on
theLCDdisplay.Tochangethebatteries,slideopenthebatterycoveras
shown and remove batteries. Replace the batteries being sure to align
properly as indicated inside the battery compartment.
Remove the battery from the instrument if it is not required for extended
periods of time in order to avoid damage to the
thermometer resulting from a leaking battery.
Please do not dispose of the product in the household waste at the end
of its useful life. Disposal can take place at appropriate collection points
provided in your country.
2 x AAA
11.Technicalspecications
Type: IRForeheadThermometer
Forehead measuring range: 34.0°C to 42.2°C.
0.1°C
Laboratory:±0.2°C,36.0~39.0°C
(Ambienttemperature:16°Cto40°C)
LiquidCrystalDisplay,4digitsplusspecialicons
a. The unit is turned ON and ready for the measurement: 1 short «beep» sound.
b. Complete the measurement: 1 long beep sound.
c. System error or malfunction: 3 short «beep» sounds.
d. Temperaturehigherthan37.5°C(YelloworRedscreendisplay):10beeps
a. Auto-Display the last measured temperature when switched on.
b. 12 readings recall in the memory mode.
a. The display will be lighted for 4 seconds when the unit is turned ON.
b. The display will be lighted again for 5 seconds when the measurement
has been completed.
16°C to 40°C
-20°Cto+50°C
Approx. 1 minute after last measurement has been taken
(2)AAABatteries-atleast1000measurements
106gwithbattery,84gw/obattery
ASTME-1965/IEC60601-1/IEC60601-1-2
Measuringrange:
Resolution:
Accuracy:
Display:
Acoustic:
Memory:
Backlight
Operatingtemperature:
Storage/transporttemperature:
Automaticswitch-o:
Battery:
Weight:
Devicestandards:

Other manuals for Vicks V977C-AUS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vicks V977C-AUS and is the answer not in the manual?

Vicks V977C-AUS Specifications

General IconGeneral
BrandVicks
ModelV977C-AUS
CategoryThermometer
LanguageEnglish

Related product manuals