Viconics VT8000 Series User Manual

028 -0427-15 _UI-V T8350_ A4 _ EN www.viconics.com June 2020
9
VT8350 [ User Interface Guide ]
Enter Setup Screen
Touch and hold this point
for 3 seconds to enter setup mode
Note: If a conguration/installer
password is activated to prevent
unauthorised access to the
conguration menu parameters, a
password entry prompt shows to
prevent access to device
conguration components.
SETUP 2/2
SETUP 1/2
1/2 Setup
Network
Configuration
Setpoints
Display
Service view
Test Outputs
BACnet MS/TP, Modbus, ZigBee and Wi-Fi network settings
(ZigBee network settings appear only if ZigBee feature is
available)
Parameter conguration menu
Setpoint settings
Status display (Read Only)
Display settings
Test outputs settings
2/2 Setup
Clock - Schedule
LUA
Wireless
Language Selection
ADR
Automatic Demand Response
LUA scripting (shows only if LUA script uploaded)
Wireless Ecosystem settings (shows only if ZigBee
feature is available)
Select language
Set clock, schedule and occupancy

Viconics VT8000 Series Specifications

General

Brand	Viconics
Model	VT8000 Series
Category	Controller
Language	English