English
15
After 30 secs upon the trigger, the device will start the backup
process. The bottom side of LCD monitor will pop up with red
triangle signal. During the backup time, no other operation can
be made. Please wait till the end of the process and avoid
removing the power.
3 Axis Gravity Sensor
G-sensor
Marcus 5 has built-in G-Sensor which can detect accident bump/crash
and trigger emergency record automatically. To avoid any false alarm
during initial installtion, G-sensor function is defaulted as OFF. Please
install device properly first and then enter MENU to activate this
function manually.
When G-Sensor is activated, detection will be started in 15 seconds to
avoid false alarm.
After 15 seconds of each boot up, G-Sensor will be activated with “G”
icon on the top side of LCD display.
When G-Sensor detects
bump/crash
Data Back-up
5/10
5/10
5/10 5/10
To Next Page
Loading...
Need help?
General
