English
03
Quick Mounting Bracket Installation
CPL filter
Mounting Bracket
1.
2.
3.
There’s one quick mounting bracket in Marcus 5 Box.
Please check the following steps to reconnect quick mounting
bracket with suction bracket.
Please loosening the cap nut on
Ball Head of Suction bracket
first, and pull out T-type ball
head.
Insert Quick mounting back into
notches. Please notice the cap nut
needs to be placed on ball head
firstly. And properly fasten the cap
nut after you put on Marcus 5.
CPL filter is optional accessory, not including in box. Users
can choose Marcus CPL filter or any 52mm standard CPL
filter.
CPL filter will lower a little bit brightness of image. Please
adjust it especially for night-time record. You can 1. Adjust
CPL angle. 2. Set EV value. 3. Or you may Disassemble
CPL filter at night.
Please notice that CPL filter is NOT recommended if your
car has film on the windshield.
To Next Page
Loading...
Need help?
General
