10
OPERATING INSTRUCTIONS
Starting & stopping
STARTING THE ENGINE
1. Turn the fuel tap ON, where fitted.
2. Move the throttle control to the RUN position.
3. Pull the starter grip until resistance is felt then
pull back briskly.
4. Repeat until engine starts.
Text
Starting & Stopping
These notes supplement the information on starting and stopping
your lawnmower engine found in the Engine Operator’s Manual
supplied with your lawnmower. Please read your Engine Operator’s
Manual prior to attempting to start your engine for the first time. If
your engine model is not covered by the notes below please read
the Engine Manual supplied with your lawnmower.
• Always check your engine oil level before starting the engine at
the start of mowing.
• Check that the spark plug is connected before attempting to
start the engine.
• Ensure you have fresh petrol in the engine’s fuel tank.
• Ensure the fuel tap, where fitted is ON before attempting to start the engine.
• For your safety, keep your hands and feet clear of the mower blades at all times.
To Next Page
Loading...
