15
Maintenance Chart
Before carrying out maintenance, STOP the engine, disconnect the
spark plug lead from the spark plug and move it well away from
the spark plug. Remove the starter key from the ignition switch of
Keystart models and disconnect the battery.
Never attempt maintenance that is not outlined in this manual.
All repair work must be carried out by a Victa Authorised Service
Centre.
* Victa recommends that certain maintenance, repair and inspection work be
carried out by a Victa Authorised Service Centre.
Features Requirements
Before Start
After Finish
Refuelling
Weekly
Monthly
If Faulty
If Damaged/Faulty
As Required
Lawnmower
Visual inspection (leaks)
• •
Throttle lever
Check operation
•
Remote air intake hose
Check
• •
Cutting system (Blades)
Inspect and check assembly
•
Replace*
• •
Side Chute
Inspect and check assembly
• •
Chassis
Check for buildup of grass
•
Clean
•
Replace
•
Air filter
Check
•
Clean
•
Replace
• •
Engine cylinder fins
Clean
• •
Spark plug
Replace
• •
All accessible fasteners
Clean
•
Retighten
•
Engine mounting bolts
Check
•
Retighten
•
Mulching plug
Inspect and check assembly
• •
Muffler
Inspect
• •
Replace
• •
Check oil
Check
•
To Next Page
Loading...
