Victa Lawnmower - Remote Air Filter Maintenance - Aerogrip Handles

22
1 Examinetheairfilterhosingforholes,chafingandleaks.Replaceitifdamaged.
2 Remove the top cover of the air filter housing by squeezing the latch on the underside of
the housing and lifting upwards.
3 Remove the element and the foam seal ring, taking care that any loose dirt does not fall
into the filter body.
4 Dustoffthesealandexamineit.Replaceitifdamagedorpermanentlycrushed.Refit
seal to housing.
5 Clean the element by slapping it on the palm of your hand. Do not use compressed air
orwashtheelementinanyliquid.Examinetheelementforholes,splitsorpermanent
clogging. Replace the element if necessary. Refit element to housing.
6 Refit the top cover by making sure the lugs at the rear of the cover are located before
clipping in the latch.
Remote Air Filter Maintenance – Aerogrip Handles
Latch
Unclip here to
remove top
Seal ring
Lugs