8
WARNING
Do not insert any object into the
battery recess other than the battery
supplied.
Do not force the battery. It should
glide smoothly if inserted or released
correctly.
ASSEMBLY PROCEDURES
NOTE: Refer to figure 6.
• Ensure the battery is fully charged; Press the button on the battery for indication of
charge level.
• Lift and hold up the battery cover (1).
• Align the battery (2) with the mower’s battery port.
• Make sure the battery release button (3) snaps in place and that battery is fully seated
and secure in the mower before beginning operation.
• Close the cover.
Installing the Battery
1
2
3
Fig. 6
To Next Page
Loading...
Need help?
General
