11
SAFETY FEATURES
Hazards
The following safety precautions must be strictly observed to avoid the risk of damage or
personal injury.
Prior to using the chainsaw, clear the operating area of objects which may be
thrown up by the cutting mechanism.
Do not start or operate the unit inside a closed room or building. Breathing
exhaust fumes can kill.
Be careful when operating the unit on slippery ground or overgrown terrain.
Be attentive for concealed hazards, such as ditches, tree stumps and roots.
Maintain a solid footing and balance while operating the unit. Cut only on
level ground. Never cut above shoulder height.
Do not touch the cutting area while in motion or while engine is running.
When handling the chain for assembly or maintenance tasks, always wear
protective gloves.
Bystanders must be at least 20 metres away during operation of the unit.
Switch the unit off immediately if approached.
Be careful when turning or swinging the unit. Look before turning or changing
direction.
Do not cut metals, glass, ceramics, plastics, ropes, wire, cables, string, etc as it
may damage or kick-back may occur. Only use on wood materials.
Beware of kick-back & understand prevention techniques to reduce risk of
injury if kick-back takes place.
Gasoline is flammable. Avoid smoking, exposing to a naked flame or spark
near the fuel. Make sure to stop the engine and allow to cool before refuelling
the unit.
Excessive vibration can cause nerve & circulation damage. Take adequate
7/100 sec
15/100 sec
The kick-back happens so quickly
that you will not be able to react
in time to avoid serious injury,
even if the chain brake works !
DANGER ZONE
FORCE
LOG
KICK-BACK
ZONE
To Next Page
Loading...
Need help?
General
