Victa VCS1845 User Manual

15
ASSEMBLY PROCEDURES
Setting Chain Tension
1. Loosen nuts - max 1/4 turn
anti-clockwise
2. Adjust tension - clockwise
4. Tighten nuts - clockwise3. Check chain tension
Chain and bar has very sharp edge's. Use cut resistant gloves when ever
handling the chain and bar.
Always disconnect the spark plug before any maintenance is performed on the
chainsaw.
A new chain will need to be tensioned more frequently then a well used chain.
Consistant checks will need to be performed on tension to ensure adequate
tension is retained.
Not for
Reproduction

Victa VCS1845 Specifications

General

Brand	Victa
Model	VCS1845
Category	Chainsaw
Language	English