AUTOMATIC CHRONOGRAPH
(SELF-WINDING MECHANICAL WATCH)
The chronograph movement indicates the hours, minutes, seconds
and date and enables short times to be measured to an accuracy of
1/5th of a second in a 12 hour period.
The crown C has three positions
• Position 1: Neutral and winding position (mechanical
movement only).
• Position 2: Correction of the date.
• Position 3: Setting the time, seconds stop.
IMPORTANT:
Some watches are fitted with a screw-down crown which
must be released before use. After use, push the crown
back to position 1, then press and screw down the crown
(to ensure a tight seal). Never operate the crown when the
watch is wet.
4342
LAP TIME
RATTRAPANTE-FUNCTIONS
To Next Page
Loading...
