11
Measurement of Intermediate (Split) Times
•Press pusher A to start timing.
•Press pusher B to read off the first split time without
interrupting the measurement of the total time.
•Press pusher B to continue timing.
The chronograph has continued its measurement so that the
tenth of a second hand now reverts to zero and the other
hands “fly back” to allow for the elapsed time.
•Press pusher B again to read the split time.
• Repeat this procedure until the action to be timed has been
completed.
• Then press pusher A to stop timing.
• Once the timing operation has been completed,
press pusher B.
The chronograph and totalizer hands are now reset
to zero.
CHRONOGRAPH FUNCTIONS
CHRONO TYPE I & II
This movement indicates measured times in tenths of a second.
Measurement of Simple Times
•Press pusher A once to start the timing operation:
press again to stop timing.
• Once the timing operation has been completed,
press pusher B. The chronograph and totalizer
hands are now reset to zero.
Measurement of Partial Times (Addition function)
•Press pusher A again to restart timing. Further pres-
sure on pusher A stops the timing operation. The
chronograph indicates the final time.
• Once the timing operation has been stopped, press
pusher B. The chronograph and totalizer hands are
now reset to zero.
10
To Next Page
Loading...
Need help?
General
