What to do if I am unable to pair my device with Victrola Radio via Bluetooth?
If you're unable to pair your device with the Victrola Radio via Bluetooth, first confirm that your device is Bluetooth compatible. If it is, try re-pairing the unit and device again.
What to do if there is no sound from my Victrola Radio?
If you're not getting any sound from your Victrola Radio, first, make sure the unit is switched to Bluetooth mode, if that's how you're trying to connect. Next, check that the volume is turned up both on your device and on the radio itself. If you're using Bluetooth, ensure your device is close to the unit without any obstructions. As an additional step, try turning both your Bluetooth device and the unit off and then back on again.
Why is there no sound coming from the speakers of my Victrola Radio?
If there's no sound coming from your Victrola Radio speakers, ensure that the volume level isn't set too low. Also, verify that the input selector matches the source you're trying to play.
How to fix a Victrola Radio that will not power on?
If your Victrola Radio won't power on, the first thing to check is whether it's properly connected to the AC power supply. Ensure the unit is plugged in.
Why can't I listen to any stations on my Victrola Radio, or the signal is weak?
If you're having trouble tuning into stations or the signal is weak on your Victrola Radio, first, make sure you've properly tuned into the desired station. Also, check if a nearby TV set is interfering with the radio reception and turn it off.
Why is there noise or distortion in the sound output of my Victrola Radio?
If you're experiencing noise or distortion in the sound output of your Victrola Radio, it could be due to interference from a nearby TV set or another device. Try turning off the TV or other appliance and relocating the unit.
How to fix distorted sound on Victrola Radio?
If the sound from your Victrola Radio is distorted, try re-orienting the antenna until the reception improves.
What to do if Victrola Radio unit fails to respond?
If your Victrola Radio unit fails to respond, disconnect the power cord and any external audio devices. Then, plug the power cord back in after one minute.
General| Brand | Victrola |
|---|---|
| Model | VC-150 |
| Category | Clock Radio |
| Power Source | AC Power |
| Display Type | LED |
| Alarm Function | Yes |
| Radio Type | AM/FM |
| Snooze Function | Yes |
| Sleep Function | Yes |
| Alarm Type | Buzzer |
To Next Page
