Need help?Do you have a question about the Victron energy 12-250 and is the answer not in the manual?
General| Brand | Victron energy |
|---|---|
| Model | 12-250 |
| Category | Inverter |
| Language | English |
Product terminals can be energized even when off. Disconnect battery before maintenance. Servicing requires qualified personnel.
Safety Class I product requires chassis grounding for protection. Contact service if grounding is damaged.
Operate in suitable conditions, avoid wet/dusty/explosive environments. Ensure 10cm ventilation space.
Connects to computers or smart devices via USB or Bluetooth for configuration and monitoring.
Adjustable battery voltage limits, output voltage, frequency, and ECO mode settings.
Monitors battery voltage/current and AC output voltage/current, including alarms.
Reliable full bridge with toroidal transformer, protected against short circuits and overheating.
Inverter switches to standby on low load and wakes up periodically to check for load increase.
Allows remote on/off switch connection and uses LEDs for status and protection indication.
Details minimum battery capacity, fuse ratings, and recommended DC cable cross-sections for models.
Warns against connecting the inverter output to any other AC source like wall outlets or generators.
Explains connecting a remote on/off switch or wiring to battery positive via ignition contact.
Inverter can be customized via computer or smart devices using VE.Direct.
Details the meaning of Green and Red LED states for inverter status and troubleshooting.
Describes how ECO mode reduces power consumption by switching to standby on low loads.
Details inverter protection mechanisms like overload, low/high battery voltage, and temperature.
To Next Page