To Next PageTo Next Page
Need help?Do you have a question about the Victron energy Atlas 12/1600 and is the answer not in the manual?
General| Model | Atlas 12/1600 |
|---|---|
| Output Voltage | 230 VAC |
| Output Waveform | Pure sine wave |
| Input Voltage | 12 V |
| Frequency | 50Hz |
| Protection | Overload, over temperature, low battery voltage, high battery voltage |
General overview of Victron Atlas inverters and their features.
Explains the Atlas inverter naming convention and basic functionality.
Details on the inverter's protection against short-circuiting.
Information on the maximum power output capabilities of the inverters.
Explanation of temperature monitoring and protection mechanisms.
Specifics of the Atlas inverter's advanced temperature protection system.
How overload protection is activated and functions.
Behavior of the inverter when input voltage is too low.
Behavior of the inverter when input voltage is too high.
Warning about reversed polarity and the importance of correct connection.
List of necessary materials for installation.
Guidance on selecting an appropriate installation location.
General overview of electrical connections for the inverter.
Instructions for connecting the earth wire for safety.
How to connect the 230V AC output.
Details on connecting the battery to the inverter, including cable resistance.
Information on fuses protecting battery cables.
Recommended cable sizes for different distances to batteries.
Step-by-step procedure for making electrical connections.
Overview of the inverter's switches and LEDs.
Steps to turn on the inverter.
Explanation of the "stand-by" mode and its automatic economy switch.
Indicators and causes for high temperature warnings.
Behavior and indicators of overload conditions.
How the inverter reacts to abnormal battery voltages.
Information about the optional remote control panel.
Recommendations for regular maintenance of the inverter.
How to adjust the output voltage using potentiometer P1.
Description of potentiometers and their function for adjustments.
General advice before starting fault tracing.
Diagnostic steps if the inverter does not start.
Troubleshooting steps for low AC output voltage.
Detailed specifications for the inverter's input parameters.
Detailed specifications for the inverter's output parameters.
Physical dimensions, weight, and construction details.
Diagram illustrating a complete Victron Energie system setup.
Diagrams showing the physical dimensions of the Victron Atlas inverters.
