Need help?Do you have a question about the Victron energy MultiPlus Series and is the answer not in the manual?
General| Input voltage range | 187-265VAC (230VAC models) 93-130VAC (120VAC models) |
|---|---|
| Output voltage | 230VAC or 120VAC |
| Frequency | 50Hz or 60Hz |
| Efficiency | Up to 96% |
| Operating temperature range | -40°C to +65°C |
| Protection Category | IP21 or IP22 |
| Standards | EN/IEC 62109-1, EN 55014-1 |
| Battery voltage | 12V, 24V, 48V |
| Protection | Overload, short circuit, over temperature, battery over voltage, battery under voltage |
| Communication | VE.Bus |
| Power output | 800VA to 15kVA |
| AC Connection | Screw terminals |
General advice on reading documentation and using the product as intended.
Safety precautions for servicing and risk of electrical shock.
Instructions for product installation and grounding.
Guidelines for product transport and storage.
Requirements for product installation location, including ventilation and heat resistance.
Guidelines for connecting battery cables, including capacity and cross-section.
Details for connecting AC input and output cables.
Details for second battery, voltage sense, and temperature sensor.
Remote control, programmable relays, and I/O ports.
Auxiliary AC output and requirements for parallel connection.
Overview of default factory settings for single-unit operation.
Detailed explanation of various configuration settings.
Software for configuring systems, downloadable from Victron website.
Tools for quick setup and advanced system configuration.
Other software tools and remote configuration options.
Steps for setting DIP switches for configuration.
Setting AC input current limit and other initial parameters.
Setting charging voltages, absorption time, and other parameters.
Detailed specs for inverter, PowerAssist, and AC input.
Specifications for charger, auxiliary output, and battery management.
Protection features and common operating characteristics.
Details for AC input, AC-out-1, and AC-out-2 terminals.
Details for battery terminals, auxiliary inputs, and relays.
RJ45 connectors, remote switch, push buttons, and DIP switches.
To Next Page