Victron energy BMV 712 Smart User Manual

Page 1 Rev: 00
1
2
3 4
- Working in the vicinity of a lead acid battery is dangerous. Batteries can generate explosive gases during
operation. Never smoke or allow a spark or flame in the vicinity of a battery. Provide sufficient ventilation around
the battery.
- Wear eye and clothing protection. Avoid touching eyes while working near batteries. Wash your hands when
done.
- If battery acid contacts skin or clothing, wash them immediately with soap and water. If acid enters an eye,
immediately flood the eye with running cold water for at least 15 minutes and get medical attention immediately.
- Be careful when using metal tools in the vicinity of batteries. Dropping a metal tool onto a battery might cause a
short circuit and possibly an explosion.
- Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a battery. A
battery can produce a short circuit current high enough to melt objects such as rings, causing severe burns.
- Disconnect the negative pole of the battery before installation.
Battery safety warnings
BMV 712 Smart
Quick installation guide
Battery monitor BMV contents
BMV and mounting dimensions
Full manual available online
Front plate
4 screws
Attachment flange
BMV head unit
Attachment sleeve
BMV shunt
RJ12 cable
(10m)
Two power
cables (2m)
https://ve3.nl/5x
BMV712 product page

Victron energy BMV 712 Smart Specifications

General

Category	Battery Monitor
Model	BMV-712 Smart
Display Type	LCD
Bluetooth	Yes
VE.Direct Port	Yes
Programmable Relay	Yes
Shunt Included	Yes (500A / 50mV)
Housing Protection	IP22
Battery Capacity	Programmable up to 9999Ah
Temperature Measurement Range	-20 to +50 °C
Operating Temperature Range	-20 to +50 °C
Supply Voltage Range	6.5 - 70 VDC
Input Voltage Range, Auxiliary Battery	6.5 - 70 VDC

Summary

Battery Safety Warnings

General Battery Precautions

Work in a well-ventilated area, avoid sparks/flames, wear protective gear.

Acid Handling

Wash skin/clothing with soap and water if exposed to acid. Seek immediate medical attention for eye contact.

Tool Safety

Avoid using metal tools near batteries to prevent short circuits and explosions.

Personal Items

Remove metal jewelry to prevent severe burns from short circuits.

Disconnection Order

Always disconnect the negative pole of the battery before installation.

BMV Mounting Options

BMV Connections and Wiring

BMV Connection Overview

Diagrams showing BMV head unit and shunt connection points for various accessories.

Battery Negative Connection

System Negative Connection

Power Cable Connection

Head Unit Connection