Victron energy BMV-712 User Manual

quick installation guide
Battery monitor
2 3
2 3
4 5
Method B
Method A
BMV-700 & BMV-702
Ø 52-53 mm
52 mm
62,4 mm
31 mm
1
7
FIRST TIMERS
In case of Li-Ion batteries, several
settings may have to be changed after
the setup wizard is completed.
Please refer to the manual.
The BMV will automatically adjust itself
to the nominal voltage of commonly
used battery systems.
Please refer to the manual.
WARNING
Please read this guide carefully to avoid
incorrect connections that can cause the
battery monitor to malfunction and/or create
CſTGJC\CTF
Disconnect the negative pole of the battery
before installation.
V2.0 01-01-2014

Victron energy BMV-712 Specifications

General

Brand	Victron energy
Model	BMV-712
Category	Measuring Instruments
Language	English

Summary

Installation Overview and Safety

Included Components

Lists the essential components for the battery monitor installation.

Installation Methods

Presents Method A and Method B for the quick installation guide.

Important Safety and User Information

Provides critical warnings and advice for first-time users.

Wiring Diagrams

Main Unit Wiring

Illustrates basic wiring for the battery monitor unit.

Starter/Auxiliary Battery Configuration

Shows wiring for monitoring starter or auxiliary batteries.

Temperature Monitoring Configuration

Details wiring for battery temperature monitoring setup.

Midpoint Voltage Monitoring for 24V Systems

24V System Without Midpoint Monitoring

Diagrams showing correct and incorrect connections for 24V systems.

24V System With Midpoint Monitoring

Guidance on applying midpoint voltage monitoring for 24V batteries.

Midpoint Voltage Monitoring for 48V Systems

48V System Without Midpoint Monitoring

Illustrates correct and incorrect wiring for 48V systems without midpoint monitoring.

48V System With Midpoint Monitoring

Details midpoint voltage monitoring for 48V battery configurations.