To Next Page
E
Edward HoffmanJul 29, 2025
What to do if my Victron Energy Controller battery is not fully charged?
- EEmily LeeJul 29, 2025
If your Victron Energy Controller battery is not fully charged, there might be several reasons: * A bad battery connection: Check the battery connection. * Cable losses are too high: Use cables with a larger cross-section. * A large ambient temperature difference between the charger and battery: Make sure that ambient conditions are equal for the charger and battery. * For 24V systems: The wrong system voltage might have been chosen (12V instead of 24V) by the charge controller. In this case, set the controller manually to the required system voltage.
General
