Need help?Do you have a question about the Victron energy Orion-Tr Smart and is the answer not in the manual?
General| Brand | Victron energy |
|---|---|
| Model | Orion-Tr Smart |
| Category | Battery Charger |
| Language | English |
Explains compatibility with smart ECUs and alternators that vary voltage or shut down.
Describes how the charger isolates starter and service batteries when the engine is off.
Details over-temperature, overload, short circuit, and connector protection features.
Highlights programmable charge algorithms and eight preprogrammed battery settings via VictronConnect.
Explains automatic calculation of proper absorption time, configurable with Victron Connect.
Covers Bluetooth connectivity for setup, monitoring, and updates via smartphones and tablets.
Describes shutdown and restart based on input voltage thresholds, configurable via Victron Connect.
Explains the remote function to enable/disable the converter via connector or VictronConnect app.
Provides guidelines for mounting the product vertically on a non-flammable surface with clearance.
Details the steps for connecting the charger in power supply mode, including app setup.
Outlines the steps for connecting the charger in charger mode, including app setup before connecting the battery.
Explains various recommended ways to wire the remote on-off function for the converter.
Describes how to force charging via the L-pin, independent of engine detection status.
Provides recommendations for cable gauge and fuse ratings based on voltage and cable length.
Specifies the recommended torque (1.6Nm) for connections, illustrated with an image.
To Next Page